Abstract
Electromechanical integration of modern science and technology development is the inevitable result of the Electrical and Mechanical This paper briefly outline the basic technology integration and development background. Reviewed the technical integration of the status of the Electrical and Mechanical, electrical and mechanical integration of technology trends.
Keywords
Status electromechanical integration technology products manufacturing technology development trends
0. Introduction
Modern scientific and technological development has greatly accelerated the different disciplines of infiltration and cross-cutting, leading to the area of the project and the transformation of the technological revolution. In the field of mechanical engineering, microelectronics and computer technology and the rapid development of the machinery industry formed by the infiltration of the mechanical and electrical integration, so that the technical structure of industrial machinery, products, functions and composition, mode of production and management system has undergone tremendous changes in the industrial production by the "machinery electrified" has entered a "mechatronics" characteristics of the development stage.
1. Summary of electromechanical integration
Mechanical and electrical integration refers to agencies winner function, dynamic function, information processing and control functions, the introduction of the electronic technology, mechanical devices and electronic design and software combined with the constraints of the system collectively.
So far, the development of electromechanical integration has become a system with a new type of self-discipline, not only with the development of science and technology, will be given new content. But the basic characteristics can be summarized as: mechanical and electrical integration system from the point of view of the integrated use of machinery technology, micro-electronics technology, automatic control technology, computer technology, information technology, sensor monitoring and control technology, power electronics technology, interface technology, Transform information technology and software programming technology, and other groups, according to target and optimize system functions organizational goals, and the layout of the rational allocation of functional modules, in the multi-functional, high quality, high reliability, low power consumption in the sense of achieving specific functional value, and the optimization of the entire system of systems engineering technology. The resulting system function, as a mechanical and electrical or mechanical-electrical integration systems integration products.
Therefore, the "mechatronics" covered "technical" and "product" two aspects. Only, electromechanical integration technology is based on the technical groups of a comprehensive organic integration of technology, rather than mechanical technology, microelectronic technology, as well as other new technologies simple combination of patchwork. This is the integration of mechanical and electrical machinery and electrical and mechanical electrification formed by the concept of the fundamental differences. Mechanical engineering technology purely technical development to the electrification machinery, it is still traditional mechanical, and its main function is still to replace and enlarge the manual. However, the development of the mechanical and electrical integration, which in addition to the microelectronics devices may replace some mechanical components of the original features, but also to many new features, such as automatic detection, automatic processing of information, automatically records, automatic adjustment and control automatic diagnosis and protection. That the integration of mechanical and electrical products is not only the extension of the hands and limbs, or people's minds and the eyes of the senses, with the characteristics of intelligent integration of mechanical and electrical and mechanical function of electrification in the essential difference between.
2. The development of mechanical and electrical integration
Mechatronics development can be roughly divided into three stages. 20 in the 1960s before the first stage, called the primary stage of this phase. During this period, people consciously or unconsciously use of electronic technology to perfect the preliminary results of the performance of mechanical products. Especially during the Second World War, a war to stimulate the machinery and electronic technologies, the combination of mechanical and electrical military technology to civilian use after the war, the post-war economic recovery has played a positive role. At that time, research and development Judging from the overall situation is still in their own state. Since then the development of electronic technology has not yet reached a certain level, mechanical technology and the integration of electronic technology is still impossible to extensive and in-depth development, and has developed a large number of products can promote.
20th Century 70 ~ 80 for the second stage, known as the flourishing development stage. During this period, computer technology, control technology, communications technology development, and mechanical and electrical integration for the development of the technical basis. Large-scale, ultra-large-scale integrated circuits and the rapid development of micro-computer, mechanical and electrical integration for the development of an adequate material basis. This period is characterized by: ① mechatronics first word was generally accepted in Japan, about the 20th century to the late 1980s in the world a more widely recognized; ② electromechanical integration technologies and products has been greatly development; ③ countries have begun on the mechanical and electrical integration technologies and products give great attention and support.
The late 1990s, and began electromechanical integration technology to intelligent direction of a new stage of in-depth development of mechanical and electrical integration into the period. On the one hand, optical, communication technology into the mechanical and electrical integration, micro-machining technology is the first electromechanical integration Zhanlu feet, there has been the integration of optical and electrical machinery and MEMS integration of new branches; on the other hand on the mechanical-electrical integration system Modeling design, analysis and integration, mechanical and electrical integration system of academic disciplines and development trends have carried out in-depth research. At the same time, artificial intelligence, neural network technology and fiber optic technology, and other fields of the tremendous progress, electromechanical integration technology has opened up a vast world of development. These studies will lead to further establish a complete electromechanical integration and gradually formed the basis of complete scientific system.
China is moving from the 20th century began in the early 1980s in this study and application. State Council set up a leading group and electromechanical integration of the technology as the "863 Program". In the development of "Ninth Five-Year" plan and outline for the development of 2010 to take full account of the international community on the development of mechanical and electrical integration technology trends and the potential impact of this. Many universities, research institutions and some large and medium-sized enterprises on the development and application of the technology to do a lot of work, has achieved positive results, but compared to advanced countries such as Japan are still a considerable gap between.
3. Trends in the development of mechanical and electrical integration
Electromechanical integration, is a mechanical, electronic, optical, control, computer, information, and other cross-integrated multidisciplinary, it dependent on the progress and development of relevant technologies and promote the development and progress. Therefore, electromechanical integration of major development are as follows:
Intelligent 3.1
Intelligent electromechanical integration of the 21st century technological development an important development direction. Builders in electromechanical integration of artificial intelligence research is receiving increasing attention, the robot and CNC machine tool is an important application of the intelligent. Here the word "intelligent" is a description of the machine is in control theory on the basis of absorption artificial intelligence, operations research, computer science, fuzzy mathematics, psychology, physiology and chaotic dynamics, such as new ideas, new methods , the simulation of human intelligence, it is judged reasoning, logical thinking, and independent decision-making ability, in order to get more control objectives. Indeed, the integration of mechanical and electrical products are the same person and a smart, it is impossible, and it is unnecessary. However, high-performance, high-speed microprocessors to electromechanical integration products endowed with the lower part of the smart or intelligent, it is entirely possible and necessary.
Modular 3.2
Modularity is an important and difficult project. As electromechanical integration products and manufacturers wide variety of research and development with a standard interface mechanical, electrical interface, dynamic interface, the interface environment electromechanical integration products unit is a very complex but is a very important thing. If developed Set slowdown, intelligent governor, the electrical power unit was integrated with vision, image processing, identification and location of the functions of the control unit, as well as to complete the typical operation of mechanical devices. This can make use of standard cell rapidly develop new products, but can also expand the scale of production. This requires the formulation of standards for the various components, modules and interfaces match. Because of conflict of interest, the recent difficult for international or domestic standards in this area, but through the creation of some large enterprises gradually taking shape. Clearly, from the standardization of electrical products, the benefits of serialization can be sure, whether it is standard electromechanical integration of production units of production enterprises or enterprises electromechanical integration products, mechanical and electrical integration of large-scale enterprises will bring better prospects.
3.3 Network
In the 1990s, computer technology, the outstanding achievements networking technology. And the rise of network technology to the rapid development of science and technology, industrial production, political, military, educational Daily Mody daily lives who have brought tremendous changes. Various networks will be the global economy, even as a production, competition between enterprises in the globalization. Electromechanical integration of new products once developed, as long as its unique features, reliable quality, will soon be sold worldwide. As the popularity of the network, network-based remote control and monitoring of various technical ascendant, and the remote control device itself is electromechanical integration products. Fieldbus and LAN technology has become the general trend of household appliances network, using a home network (home net) will be all kinds of home appliances to connect into the computer as the center of computer integrated appliance system (computer integrated appliance system, CIAS), and let people high-tech home sharing of the convenience and happiness. Therefore, electromechanical integration products will undoubtedly develop in the direction toward the network.
3.4 miniaturization
Miniaturization of the rise in the late 1980s, refers to the integration of micro-electromechanical machines and the trend of development of micro-areas. Abroad called MEMS (MEMS), refers to the geometric size of not more than 1 cm3 electromechanical integration products, and micron, nanometer development. Micro-electro-mechanical integration products are small, less energy consumption, exercise flexibility in the biological medical, military, and information, has unparalleled advantages. Micro-electro-mechanical integration is the bottleneck of the development of micro-mechanical technology, micro-electromechanical integration products processing using sophisticated processing techniques, namely the ultra-sophisticated technology, including lithography and etching two.
Green 3.5
Industry developed for the people's living brought tremendous changes. On the one hand, rich material life comfortable on the other hand, fewer resources, the ecological environment is seriously contaminated. So, people called for the protection of environment and resources, and return to nature. This concept of green products in the voice of the right moment, green is the trend of the times. Green products in its design, manufacture, use and destruction of the life process, to meet specific environmental protection and human health requirements, sound or endanger the ecological environment is very small, high resource utilization. Design green electromechanical integration products, have a vision of the future of the development. Electromechanical integration of green products mainly refer to, the use of time is not pollute the ecological environment, scrapped after recycling.
3.6 systematic
One characteristic of systematic performance system architecture is open and further use of the model bus architecture. System configuration can be flexible, tailoring and arbitrary combinations at the same time seek to achieve more coordination and control subsystems and integrated management. The second performance is greatly enhanced communications functions, in addition to general RS232, RS485 there, DCS personification. Future integration of mechanical and electrical products and people pay more attention to the relationship between mechanical and electrical integration personification has two implications. Level, the integration of mechanical and electrical products targeted end-use, integration of mechanical and electrical products to the empowerment of the intelligent, emotional, human nature has become increasingly important, especially for household robots, the realm of high-level integration is the plane. Another is based on biological mechanism of the development of various electrical and mechanical products one flower. In fact, many electromechanical integration products are inspired by the animals developed the.
4. Conclusion
In short, the emergence of mechanical and electrical integration is not isolated, it is many of the crystallization of scientific and technological development, social development of the productive forces to the inevitable demand of a certain stage. Of course, electromechanical integration related technology there are many, and with the development of science and technology, integration of the various technology trends will become more apparent, electromechanical integration technology and broad development prospects will be more bright.
5. References
1. LI Jianyong. Electromechanical integration technology. Beijing: Science Press, 2004.
2. Lee Yun-hua. Mechatronics. Beijing: Beijing Aerospace University Press, 2003.
3. ZHONG Yu. Electrical and Mechanical control works. Beijing: Tsinghua University Press, 2002.
4. Liu Zhubai. Knowledge innovation methodology. Beijing: Machinery Industry Press, 1999.
