|
|
南 京 理 工 大 学
毕业设计说明书(论文)
| 作 者: | 准考证号： | |
| 教学点: | ||
| 专 业: | ||
| 题 目: | ca6140车床主轴机械加工工艺设计 | |
指导者：
(姓 名) (专业技术职务)
评阅者：
(姓 名) (专业技术职务)
年 月
毕业设计说明书（论文）中文摘要
| CA6140车床主轴的机械加工工艺设计为本课题的研究内容，对此研究查阅的大量的资料，首先明白机械加工工艺过程就是用切削的方法改变毛坯的形状、尺寸和材料的物理机械性质成为具有所需要的一定精度、粗糙度等的零件。 为了能具体确切的说明过程，使工件能按照零件图的技术要求加工出来，就得制定复杂的机械加工工艺规程来作为生产的指导性技术文件，学习研究制定机械加工工艺规程的意义与作用就是本课题研究目的。 制订CA6140车床主轴机械加工工艺规程，关键是工序的划分和定位基准的选择。在设计开始的过程中，我们必须要认真分析零件图，了解其箱体零件的结构特点和相关的技术要求，对箱体零件的每一个细节，都应仔细的分析，如箱体加工表面的平行度、粗糙度、垂直度，特别是要注意箱体零件各孔系自身精度（同轴度、圆度、粗糙度等）和它们的相互位置精度（轴线之间的平行度、垂直度以及轴线与平面之间的平行度、垂直度等要求），箱体零件的尺寸是整个零件加工的关键，必须弄清箱体零件的每一个尺寸。绘制零件图是一个重点，同时因为箱体零件比较复杂,所以也是一个难点。我们采用autoCAD软件绘制零件图，一方面增加我们对零件的了解认识，另一方面增加我们对autoCAD软件的熟悉。 关键词 CA16140 主轴 机械加工 工艺设计 |
毕业设计说明书（论文）外文摘要
| Title ca6140车床主轴机械加工工艺设计 Abstract The machining process design of the spindle of CA6140 lathe is the research content of this subject. For this research, a large number of data are consulted. First of all, it is understood that the machining process is to change the shape of the blank by cutting method. Dimensions and physical mechanical properties of materials become parts with required precision, roughness, etc.In order to specify the process and make the workpiece be processed in accordance with the technical requirements of the part drawing, it is necessary to formulate complex machining process rules as a guiding technical document for production. The purpose of this research is to study and study the significance and function of developing machining process rules. The key to drawing up CA6140 lathe spindle machining process rules is the division of working procedure and the selection of positioning datum. In the beginning of the design, we must carefully analyze the parts drawing, understand the structural characteristics and related technical requirements of the box parts, and carefully analyze every detail of the box parts, such as the parallelism of the machined surface of the box, Roughness, perpendicularity, and in particular, pay attention to the accuracy of each hole system (coaxiality, roundness, roughness, etc.) and their mutual position accuracy (parallelism between axes, perpendicularity and parallelism between axes and planes, etc.), Perpendicularity, etc.), box The dimension of the part is the key to the machining of the whole part. Drawing part drawing is an important point, but also a difficult point because of the complexity of box parts. We use autoCAD software to draw part drawing, on the one hand to increase our understanding of the parts, on the other hand, to increase our familiarity with autoCAD software. Keywords CA16140 Spindle Machining Technology Design |
目 次
2.2ca6140车床主轴加工的主要问题和工艺过程设计所应采取的相应措施4
