摘  要

带式输送机是我国目前必不可缺的机电设备，其凭借具有输送距离长、运量大、连续输送等特点，而且运行可靠，易于实现自动化和集中化控制，尤其对高产高效矿井，带式输送机已成为煤炭开采机电一体化技术与装备的关键设备。带式输送机由驱动装置拉紧输送带，中部构架和托辊组成输送带作为牵引和承载构件，借以连续输送散碎物料或成件品。该次课题研究围绕带式输送装置的各个部分展开足一攻破设计，其中轴承的设计和驱动的改善为主。

齿轮传动是应用极为广泛和特别重要的一种机械传动形式，它可以用来在空间的任意轴之间传递运动和动力，目前齿轮传动装置正逐步向小型化，高速化，低噪声，高可靠性和硬齿面技术方向发展，齿轮传动具有传动平稳可靠，结构紧凑，维护方便等优点。因此，它在各种机械设备和仪器仪表中被广泛使用。本次设计的就是一种典型的一级圆柱直齿轮减速器的传动装置。其中小齿轮材料为40Cr（调质），硬度约为280HBS，大齿轮材料为45钢（调质），硬度约为240HBS，齿轮精度等级为7级，轴、轴承、键均选用钢质材料。

关键词：齿轮传动、传动装置、齿轮减速器

Abstract

Belt conveyor is an indispensable electromechanical equipment in our country at present. It has the characteristics of long transportation distance，large transportation capacity， continuous transportation and so on. It is reliable and easy to realize automation and centralized control， especially for high-yield and high-efficiency mines. Belt conveyor has become the key equipment of mechatronics technology and equipment in coal mining. The belt conveyer consists of a driving device to tighten the conveyor belt， a middle frame and a roller to constitute a conveyor belt as a traction and a bearing member to continuously transport scattered materials or finished products. The research focuses on the design of each part of belt conveyer， in which the design of bearing and the improvement of drive are main.

Gear transmission is a kind of mechanical transmission which is widely used and especially important. It can be used to transfer motion and power between any axis in space. At present， gear transmission is gradually becoming miniaturized， high-speed and low noise. With the development of high reliability and hard tooth surface technology， gear transmission has the advantages of stable and reliable transmission， compact structure and convenient maintenance. Therefore， it is widely used in various mechanical equipment and instruments. This design is a typical one-stage spur gear reducer transmission. The pinion material is 40Cr (tempering and tempering)， the hardness is about 280 HBS， and the big gear material is 4. Steel (quenched and tempered)， hardness about 240 HBS， gear accuracy grade 7， bearings， keys are steel materials.

Key words: gear transmission， gear reducer

目  录

摘  要I

AbstractII

1 绪论1

1.1设计概述1

1.2研究内容及参数1

1.3 带传动2

1.4圆锥-圆柱齿轮传动减速器2

2结构设计4

2.1V带传动4

2.2减速器内部的传动零件4

2.3联轴器的选择4

3 设计计算过程及说明6

3.1选择电动机6

3.1.1电动机类型和结构型式选择6

3.1.2选择电动机容量6

3.1.3选择电动机的转速6

3.1.4确定电动机型号6

3.2计算传动装置的运动和动力装置参数7

3.3带传动设计7

3.3.1定v带型号和带轮直径7

3.3.2计算带长7

3.4齿轮传动设计8

3.5轴的设计13

3.6轴承的选择20

3.9键的选择21

3.10减速机箱体的设计22

3.11减速器附件设计22

3.11.1窥视孔和视孔盖22

3.11.2通气器22

3.11.3油面指示器22

3.11.4放油孔和螺塞23

3.11.5起吊装置23

3.11.6定位销23

3.11.7起盖螺钉23

4箱体结构的设计24

4.1 机体有足够的刚度24

4.2考虑到机体内零件的润滑，密封散热。24

4.3机体结构有良好的工艺性.24

4.4对附件设计24

4.4.1视孔盖和窥视孔24

4.4.2 油螺塞24

4.4.3油标25

4.4.4 通气孔25

4.4.5位销25

4.4.6 吊钩25

5 润滑密封设计27

6机头传动装置的驱动改善28

6.1机头传动装置28

6.2基本结构28

6.3类型29

6.4带式摩擦驱动30

6.5卸载滚筒摩擦驱动30

总  结31

参考文献32