|
|
目录
摘要 1
Abstract : 2
第一章:概述 3
第二章：零件工艺的分析 3
2.1 零件的工艺分析 3
2.2 确定毛坯的制造形式 3
2.3 江淮500后桥壳体零件的结构工艺性 3
第三章：拟定江淮500后桥壳体加工的工艺路线 4
3.1 定位基准的选择 4
3.2 加工路线的拟定 4
第四章：机械加工余量，工序尺寸及毛坯尺寸的确定 7
4.1 机盖 7
4.2 机体 8
4.3 江淮500后桥壳体 8
第五章：确定切削用量及基本工时 9
5.1 箱盖 9
5.2 机座 14
5.3 机体 23
第六章 专用夹具的设计 34
6．1 粗铣下平面夹具 34
6.2 粗铣前后端面夹具设计 36
参考文献 40
结论： 41
摘要
在生产过程中，使生产对象（原材料，毛坯，零件或总成等）的质和量的状态发生直接变化的过程叫工艺过程，如毛坯制造，机械加工，热处理，装配等都称之为工艺过程。在制定工艺过程中，要确定各工序的安装工位和该工序需要的工步，加工该工序的机车及机床的进给量，切削深度，主轴转速和切削速度，该工序的夹具，刀具及量具，还有走刀次数和走刀长度，最后计算该工序的基本时间，辅助时间和工作地服务时间。
关键词：工序，工位，工步，加工余量，定位方案，夹紧力
Abstract :
Enable producing the target in process of production (raw materials, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc. and call it the craft course. In the course of making the craft , is it confirm every erector location and worker step that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally.
Keyword:
The process, worker one, worker's step , the surplus of processing, orient the scheme , clamp strength
